|
 |
|
|
|
If your order is time sensitive, please use one of the expedited options on the check out page, but please read our shipping advisory. Orders accepted 24/7/365 via the website. Toll Free Tech Support Hours: Mon-Fri, 10am to 4pm, PST. We also have an alternate phone number in case the above has problems: 1(877)782-3488. Thank you! Use discount code "SAVE7" for 7% off your order!
|
|
|
|
Wall Of Shame!
|
|
|
*** After you click on search, you'll need to scroll down to see the results.
|
|
| "If there be any among us who [disagree], let them stand undisturbed as monuments of the safety with which error of opinion may be tolerated, where reason is left free to combat it." Thomas Jefferson, March 4, 1801 |
We carry more bulk head fittings than anyone on the net.
VERY IMPORTANT: READ EVERYTHING ON THIS PAGE BEFORE CLICKING
We carry more bulk head fittings than anyone on the net. It can become confusing, so take your time to review every page we have listed below. Bulkhead fittings are identified by the size of the pipe it connects to, not the hole size. The hole size will be specified in the description for each bulkhead fitting. When we describe the bulkhead fitting, the first designation is the flange side and the second is the back side. ie, fpt (female npt) x slip means the flange side has a female pipe thread and the back side would have a slip socket for pipe to be glued into. Again, size always represents the pipe size that fits the bulk head, not the hole size. If you don't find the size bulkhead fitting you want in one category, look in some of the others. All bulkhead fittings come with at least one gasket and one nut unless stated otherwise in the description. Extra nuts and gaskets are available at the link near the bottom of this list.
 |
|
Economy ABS Bulkhead fittings 1/2" to 2" - Made in the USA! These economy ABS bulkhead fittings are available in 4 different configurations: Slip x slip, slip x fpt, fpt x slip and fpt x fpt. Sizes available are 1/2", 3/4", 1" 1.5" and 2". All are black in color, flange is cone shaped, about 3/8" thick. Some may be imported, most are made in USA. |
 |
|
Economy PVC Bulkhead fittings 1/2" to 2" - These economy PVC bulkhead fittings are available in 4 different configurations: Slip x slip, slip x fpt, fpt x slip and fpt x fpt. Sizes available are 1/2", 3/4", 1" 1.5" and 2". All are black in color, flange is flat face, about 1/4" think. Most made in China, but we are trying to find more made in USA. |
 |
|
Sch. 80 PVC Bulk Head fittings - These are all potable water rated, sch 80 fittings. Sizes available are 1/4", 3/8", 1/2", 3/4", 1", 1.25", 1.5", 2", 2.5", 3", 4", 6" and 8". (Special order on some sizes, if you click on this link and don't see the size you need, email us for details) All gray PVC. |
 |
|
Swivel Bulkhead Fittings. Goes through the wall and swivels under pressure without leaking! (PVC) |
 |
|
Quick Disconnect (QD) 150PSI Modular PVC Bulkhead Fittings & Support Parts. Approved for potable water. These bulkheads fit 1" and 1.25" holes in materials up to 1/16" thick. For use with 1/2", 3/4", and 1" hose or 3/4", 1", and 1.25" PVC pipe. If you want the job to have a professional industrial look, these are the fittings for you! |
|
|
 |
|
Custom Made Extra Long Bulkhead Fittings Extra Long. Available in 1/2", 3/4", 1", 1.5" and 2" pipe sizes. (For 1.25" please contact us.) Available for wall thicknesses of 3" to 12". (Longer lengths possible, please email us for a quote.) |
 |
|
Uniseals are engineered grommets for tanks and drums to allow Sch 40, Sch 80 and other IPS sized pvc pipe to pass through into the tank or drum without leaking. They work on most tanks and drums with a thin wall. (less than 1/4"). They will work in flat or mildly curved surfaces, for example 55 gallon drums. Stocked in sizes 1/4" up to 6" PVC Sch 40/80 pipe. Colors are black and white. |
 |
|
Polypropylene fpt (female npt) reverse (left-hand) thread Bulkhead Fittings. In Poly, 1/2", 3/4", 1", 1.25", 1.5", 2", 3" and 4". All come with 2 gaskets (1 hard, 1 soft). Black in color. |
 |
|
Extra Nuts, 90 degree nuts, gaskets, tools, and parts for bulk head fittings. Be careful on this page. While it has a lot of different items, not everything here works with every bulkhead. Email us if you have questions. |
 |
|
One off, obsolete, old style, discontinued medium and heavy duty bulkhead fittings (aka tank adapters). Some unusual, discontinued, obsolete, etc bulk head fittings. Most ABS, a few PVC. Rated and Non-rated fittings. Sizes include 1/2", 3/4", 1", 1.5", and 2", some having several different styles of each size. Many odd-ball and one of a kind bulkhead fittings here. Some in black and some in white. |
|
|
| All text, images, layout and design Copyright 2002 - 2024 FlexPVC ®, PVC Distributors LLC. - - - FlexPVC ® is a Registered Trademark of PVC Distributors LLC
|
|
