 Full Specifications & Dimensions for FlexPVC® Flexible PVC Pipe
Includes: ID (Inner Diameter), OD (Outer Diameter), Minimum bend radius, working & burst pressures, vacuum ratings, weight per foot, and roll dimensions. Specifications and dimensions for Standard Rigid PVC Pipe are here. FlexPVC Flexible PVC Pipe fits standard Sch 40 and Sch 80 fittings. Our FlexPVC brand Flexible PVC pipe has an NSF 50 rating. It is suitable for direct burial, and approved applications include swimming pools, hot tubs, spas, irrigation and for other purposes. (NOT approved for human (potable) use.)
To buy rolls of flexible pvc pipe click on the first column of the size listed below.
To buy FlexPVC® flexible PVC Pipe by the foot, click here
| Type of Flexible PVC Pipe |
OD (inches, exactly) |
ID (inches)* |
Wall (inches)* |
Working Pressure (PSI@73F)** |
Burst Pressure (PSI@73F)** |
Min. Bend Radius (inches) |
How Long A Piece Needed To Make A U-Bend (inches)*** |
Vacuum (inches mercury) |
Weight #/ft |
Roll Size 50' |
Roll Size 100' |
|
|
.840" |
≅.60" |
.120" |
100 psi |
400 psi |
2" |
8" |
28" |
.15 |
23"x22"x3" |
23"x22"x5" |
|
|
1.050" |
≅.786" |
.140" |
100 psi |
400 psi |
2" |
10" |
28" |
.23 |
24"x23"x3" |
24"x23"x8" |
|
|
1.310" |
≅1.036" |
.150" |
100 psi |
355 psi |
3" |
14" |
28" |
.32 |
27"x26"x5" |
30"x29"x6" |
|
|
1.660" |
≅1.370" |
.150" |
80 psi |
250 psi |
4" |
20" |
28" |
.40 |
29"x28"x5" |
32"x31"x7" |
|
|
1.900" |
≅1.586" |
.170" |
65 psi |
200 psi |
5" |
25" |
28" |
.50 |
29"x28"x6" |
35"x34"x6" |
|
|
2.375" |
≅2.045" |
.170" |
60 psi |
175 psi |
8" |
32" |
28" |
.70 |
37"x36"x5" |
36"x35"x11" |
|
|
2.875" |
≅2.500" |
.220" |
50 psi |
125 psi |
10" |
40" |
28" |
.95 |
45"x44"x8"* |
48"x47"x12"* |
|
|
3.500" |
≅3.00" |
.216" |
50 psi |
125 psi |
12" |
72" |
28" |
1.28 |
43"x42"x10"* |
59"x58"x12"* |
|
|
4.500" |
≅4.000" |
.235" |
45 psi |
110 psi |
18" |
84" |
28" |
1.93 |
45"x44"x13"* |
73"x72"x13"'* |
|
|
6.625" |
≅6.000" |
.395" |
45 psi |
100 psi |
24" |
144" |
28" |
4.42 |
85"x84"x18"* |
85"x84"x22"* |
≅ Means Approximately Equal To.
*Can vary +/- 5% from pipe to pipe.
**PVC pipe is derated for temperatures over 73F. See the de-rating chart below.
***Minimum length needed to easily make a 180 degree turn. It will go tighter but you'll need a torque multiplier to do so.
| Disclaimer: Pressure ratings above are for a temperature of 68F. See chart below for higher temperatures. |
| Operating Temperature F°(C°) |
73(23) |
80(27) |
90(32) |
100(38) |
110(43) |
120(49) |
130(54) |
140(60) |
| PVC Pipe |
100% |
90% |
75% |
62% |
50% |
40% |
30% |
22% |
| Note: The temperature ratings above are for the temp of the pipe, not the fluid traveling through it. Typically the temperature of the pipe is much less than the fluid going through it due to radiation (heat loss) and the heat barrier effect, ie the insulating properties of the pipe. |
(Chart and HTML copyright FlexPVC®.com 2004-2023)
|
