|
We have an extensive selection of barb fittings. The come in PVC, Plastic, Nylon, Polypropylene and other materials.
If you don't find the barb fitting you are looking for in one material, check some of the others. The PVC barb fittings are by far the strongest and most durable, however sometimes we can only find a certain barb fitting in
PE (Polyethylene), PP (Polypropylene), Nylon, or generic plastic so you'll need to do some digging on our website. Also note that each of these pages are very large, so you'll have to scroll down a lot to see all the barb fittings we
have.
Note: Most barb fittings are "ribbed barbs" meaning they have the ridges to help hold the hose to the barb. However, some have a "smooth barb" which has no ridges. They are easier to take the hose on and off and if you
need such a feature be sure to look for them. We differentiate them with "RB" for "Ribbed Barbs" and "SM" for "Smooth Barbs." Also note: you do not use glue on barbed fittings, whether smooth or ribbed. You only use glue for FlexPVC®.com
pipe that glues into a standard sch 40 fitting. Barbed fittings are always secured with a clamp. (radiator hose clamp, specialized tie wrap, etc.) The reason for this is simple: hose flexes outward, which will pull it away from the fitting, thus
breaking the seal, so gluing will have no benefit. FlexPVC®.com is different because it glues into a fitting and the pressure in the pipe/hose presses it against the fitting, not away from it. And of course you would never use
FlexPVC®.com pipe with barb fittings since their design is to be glued into Sch 40 fittings, not barbs.
 |
 |
Slip & Spigot Barb Fittings. - These fittings are barb by spigot or barb by slip. Ie, they will either glue into a
PVC sch 40/80 fitting (ie spigot) or glue onto a PVC pipe (slip.) |
 |
|
Threaded Barb Fittings. - These fittings will be barb x FPT or barb x MPT. Ie, they will either thread into a Female (FPT, Female National Pipe Thread) fitting or thread on to a Male (MNPT, Male National Pipe Thread) fitting. |
 |
|
Garden Hose Barbs. |
|
|
Twist Barbs. 1/2" only. |
|
|
 |
|
Inexpensive Barb Valves for common sizes of vinyl, rubber and other tubing and hose. |
 |
|
Barb Manifolds. All sorts of barb manifolds. 3/8" barbs and 3/4" barbs. Smooth Barbs - SB and Ribbed Barbs - RB on this page. Read the description carefully. Flow through manifolds and dead end manifolds. Be sure to scroll down to see them all. |
 |
|
Barb Plugs. Just like the name says. |
 |
|
Barb Tees. Another page of an extensive selection of Barb Tees. Barb x Barb x Barb, and Barb x Barb x MPT, Barb x Barb x FPT, and even
Slip x Spigot x Barb. Even a double barb Tee here. |
 |
|
Barb Couplings. Couples and Reducing Couplers. |
|
|
Twist Barbs. |
|
|
