|
 |
|
|
|
If your order is time sensitive, please use one of the expedited options on the check out page, but please read our shipping advisory. Orders accepted 24/7/365 via the website. Toll Free Tech Support Hours: Mon-Fri, 10am to 4pm, PST. We also have an alternate phone number in case the above has problems: 1(877)782-3488. Thank you! Use discount code "SAVE7" for 7% off your order!
|
|
|
|
Wall Of Shame!
|
|
*** After you click on search, you'll need to scroll down to see the results.
|
|
| | "If there be any among us who [disagree], let them stand undisturbed as monuments of the safety with which error of opinion may be tolerated, where reason is left free to combat it." Thomas Jefferson, March 4, 1801 |
|
|
Smooth & Ribbed Barb Manifolds | PVC Manifolds | FlexPVC®
| This page contains both smooth barb and ribbed barb fittings. "Ribbed barbs" meaning they have the ridges to help hold the hose to the barb. However, some PVC water manifolds have a "smooth barb" which has no ridges. They are easier to take the hose on and off and if you need such a feature be sure to look for them. We differentiate these PVC manifolds with "RB" for "Ribbed Barbs" and "SM" for "Smooth Barbs." Feed manifolds and distributors with PVC Pipe (rigid or flexible) and distribute via Clear Braided PVC hose by the foot or Clear PVC Tubing. Manifolds and distributors with 3/8" SMOOTH BARBS will also work with 1/2" John Guest Polyethylene Tubing by slipping the 1/2" PE tubing directly over the 3/8" barbs because 1/2" PE tubing is 3/8" ID. You can also use a 3/8" JG fitting (couple, elbow, wye, etc.) that will go over 3/8" smooth barbs so you can then connect 3/8" PE tubing via the JG Fitting. |
MADE IN THE USA
|
|
|
|
|
