If your order is time sensitive, please use one of the expedited options on the check out page, but please read our shipping advisory. Orders accepted 24/7/365 via the website. Toll Free Tech Support Hours: Mon-Fri, 10am to 4pm, PST. We also have an alternate phone number in case the above has problems: 1(877)782-3488. Thank you! Use discount code "SAVE7" for 7% off your order!
*** After you click on search, you'll need to scroll down to see the results.
"If there be any among us who [disagree], let them stand undisturbed as monuments of the safety with which error of opinion may be tolerated, where reason is left free to combat it." Thomas Jefferson, March 4, 1801
Please note: WE ONLY SELL THE EXTENDED LIFE PUMPS and PUMP HEADS. Please do not compare our prices with standard Aquatec pump prices from other dealers. These pumps are special ordered from Aquatec for us and our customers. The heads will last 2-3 times as long as the standard Aquatec headed pumps. We also only order the 3/8" push in connections and the largest motor with the higest capacity and pressure. Normally these pumps are only available to OEMS, but we offer them to our customers for a very reasonable price.
Aquatec Pumps and replacement pump heads are MADE IN THE USA!
Aquatec Upper Half - Extended Life. We have this pump head specially made just for us. It features extended wear parts inside the head to effectively double the life of the pump. It's super easy to replace. 3 #20 Torx bit screws and you are done. Takes 60 seconds. This is basically the "wet end" of the Aquatec 8800 pumps. Life expectancy of these parts is about 8,000-20,000 hours depending on the quality of the water. Use a prefilter to extend out to 20,000 hours. In harsh water, the life expectancy could be lower. You should replace the wet end of the pump every 1-3 years for max life out of your Aquatec 8800 (8851) high pressure booster pumps.
This will fit any Aquatec 8800 series pump, so if you have an old pump with a leaking or worn out wet end, you can make it better than new with this assembly. This pump head is compatible with Methanol up to a 50/50 Water mix. Superior substitute to 8851-2JM3 head we used to carry.