If your order is time sensitive, please use one of the expedited options on the check out page, but please read our shipping advisory. Orders accepted 24/7/365 via the website. Toll Free Tech Support Hours: Mon-Fri, 10am to 4pm, PST. We also have an alternate phone number in case the above has problems: 1(877)782-3488. Thank you! Use discount code "SAVE7" for 7% off your order!
*** After you click on search, you'll need to scroll down to see the results.
"If there be any among us who [disagree], let them stand undisturbed as monuments of the safety with which error of opinion may be tolerated, where reason is left free to combat it." Thomas Jefferson, March 4, 1801
Gate and blade valves have the advantage of full flow. Most ball valves are "nominal" and the ball inside is actually smaller than the rated size. So if you are using ball valves and flow is important, you should use the next size up and then use reducer bushings to take it back down. Or you can use gate/blade valves, which by their design are full flow. Browse our selection of PVC gate valves and flanged gate valve seal kits today.
Note: Blade valves generally have a simple shaft that the gate is pulled up or pushed down into place. Gate valves also have a gate, but it usually is moved by a shaft with threads that move it up or down more slowly. Blade valves are great when you want an "instant open" or "instant close." PVC Gate Valves are better if you are trying to regulate the flow somewhat. Ball valves are the best when cost is a factor. Ball valves are by far the least expensive valves available. True Union Ball Valves are one of the most expensive valves, however they can be rebuilt and serviced and are generally a better made valve. Explore our selection and discover the slip gate valves you need.
2.5" Clear PVC Gate Valve. One side 2.5" slip socket, the other side 2.5" spigot (glues into a 2.5 fitting or union.) 100% positive shut off. Adjustable flow and easy to adjust. Non-metal valve. The only metal on this valve is the screw used to hold the handle on. Not NSF rated. Good for irrigation, spa, other uses, but not potable water applications. Length of gate valve is 5.7", overall height (top to bottom) is about 8.5" Made in the USA