"If there be any among us who [disagree], let them stand undisturbed as monuments of the safety with which error of opinion may be tolerated, where reason is left free to combat it." Thomas Jefferson, March 4, 1801
PVC True Union Ball Valves | Gray PVC Pipe Fittings
Gate and blade valves have the advantage of full flow. Most ball valves are "nominal" and the ball inside is actually smaller than the rated size. So if you are using ball valves and flow is important, you should use the next size up and then use reducer bushings to take it back down. We offer 1/2-inch to 4-inch sizes of these gray PVC pipe fittings. Or you can use gate/blade valves, which by their design are full flow.
Note: Blade valves generally have a simple shaft that the gate is pulled up or pushed down into place. Gate valves also have a gate, but it usually is moved by a shaft with threads that move it up or down more slowly. Blade valves are great when you want an "instant open" or "instant close." Gate valves are better if you are trying to regulate the flow somewhat. Ball valves are the best when cost is a factor. Ball valves are by far the least expensive valves available. True Union Ball Valves are one of the most expensive valves, however they can be rebuilt and serviced and are generally a better made valve.
1" True Union Ball Valve, comes with both slip socket and FPT (female NPT) ends. A compact and very well made valve, however not full flow. If you need full flow, buy one size larger valve and bush down. Red handle. Easy to turn design. Test pressure 225PSI at 73F, working pressure 150PSI at 73F. Rated temperature range, 40F to 125F continuous, up to 140F for short periods. EPDM seal and O-ring.
Overall length: 5.747", Socket Depth: 1.105", therefore cut out = 3.537" for splicing into existing lines. Imported, Made in China