PRICES ON THE WEBSITE ARE SUBJECT TO CHANGE. ALL ORDERS ARE REVIEWED AND WE MAY HAVE TO ADJUST PRICES ON SOME ITEMS. You will given the option to accept the updated price or cancel. If your order is time sensitive, please use one of the expediated options on the check out page. Due to demand and lack of raw materials large orders for some items are out of stock for 1-3 months. Also please read UPS Suspends Performance Guarantee and shipping costs are rising very fast. Special order items may be delayed longer. Orders accepted 24/7/365 via the website. Toll Free Tech Support Hours: Mon-Fri, 10am to 4pm, PST. We also have an alternate phone number in case the above has problems: 1(877)782-3488. Thanks!
"If there be any among us who [disagree], let them stand undisturbed as monuments of the safety with which error of opinion may be tolerated, where reason is left free to combat it." Thomas Jefferson, March 4, 1801
Assembled Part. 6" IPS size (Sch 40, 80, DWV, Class 200, Class 100, etc) on one side and SDR35 6" on the other. Be sure to follow instructions. Sides will be marked but it's pretty obvious which one goes where. If you are using this to connect to ABS pipe you MUST use the multiple purpose ABS to PVC/CPVC glue. If you are connecting PVC to PVC the clear or blue pvc glue/cement will work fine.
INSTRUCTIONS: It's best to glue the Sch 40/80 pipe (IPS size) in first. If you do not it's possible the SDR35 6" pipe will go in too far as it's OD is smaller than the stop in the middle of this couple. After the IPS size pipe is glued in, you can then glue in the SDR 35 6" pipe.
