If your order is time sensitive, please use one of the expedited options on the check out page, but please read our shipping advisory. Orders accepted 24/7/365 via the website. Toll Free Tech Support Hours: Mon-Fri, 10am to 4pm, PST. We also have an alternate phone number in case the above has problems: 1(877)782-3488. Thank you! Use discount code "SAVE7" for 7% off your order!
*** After you click on search, you'll need to scroll down to see the results.
"If there be any among us who [disagree], let them stand undisturbed as monuments of the safety with which error of opinion may be tolerated, where reason is left free to combat it." Thomas Jefferson, March 4, 1801
Class 200, Thin Wall PVC Rigid Pipe. See PVC Pipe Dimensions Page for ID, OD and wall thickness. Rated to 200PSI. Good for projects that do not need a lot of strength. Class 200 PVC pipes are good for projects that do not need a lot of strength. If you're looking for something to handle less water pressure, check out ourClass 100 PVC pipes. This lightweight PVC pipe will save about 50% weight overall. Length is plus or minus 1/8". To buy more than one size, pick the length you want, and click on the add to cart button. Then click the back button, change the length, and click on the add to cart button again. It should add both sizes of these rigid thin wall PVC pipes to your cart. The price shown is price per foot and is for short sections of pipe. Orders with any piece over 4' long may have a $10 oversize charge added to your order. It will depend on the rest of your order. If your order is only one piece of pipe over 4' long there will definitely be a $10 oversize charge added to your order because it's very expensive to ship pipe over 4' by itself. We will waive the oversize fee whenever possible.
Please note: UPS adds a surcharge for all packages over 4' long. So it's cheaper to ship several smaller pieces of this rigid thin wall PVC pipes than it is one long piece.
Cut Class 200 PVC pipes are non-cancelable and non-returnable so please be sure you are ordering the correct size and length.
Thank you.
MADE IN THE USA
Class 200, Thin wall PVC Rigid Pipe. Please see our PVC Pipe Dimensions Page for ID, OD and wall thickness. Note: Length must be between 6" and 72". If you specify anything longer it could result in additional shipping and handling fees being added to your order. For pieces less than 6" or longer than 72" please email us for a quote)
