If your order is time sensitive, please use one of the expedited options on the check out page, but please read our shipping advisory. Orders accepted 24/7/365 via the website. Toll Free Tech Support Hours: Mon-Fri, 10am to 4pm, PST. We also have an alternate phone number in case the above has problems: 1(877)782-3488. Thank you! Use discount code "SAVE7" for 7% off your order!
*** After you click on search, you'll need to scroll down to see the results.
"If there be any among us who [disagree], let them stand undisturbed as monuments of the safety with which error of opinion may be tolerated, where reason is left free to combat it." Thomas Jefferson, March 4, 1801
VERY IMPORTANT: Metric pipe, adapters and fittings
There are two metric pipe standards: JIS and DIN. The very first thing you need to do is determine which standard you have. Use the chart below to determine which you have by measuring the ID and oD of your pipe and comparing it with the numbers in the chart below. It helps if you have a digital caliper set to read in mm. All our pipe is DIN, but the fittings are identified by JIS and others DIN. So just watch that. We have the actual measurements of each part in the description of the part. Call or email us if you have questions! :-)
Here is a chart that will help you identify which metric pipe you have:
Price includes DIN PVC pipe and cutting charges. Cuts for metric PVC pipes will be clean straight cuts. Please note: UPS adds a surcharge for all packages over 4' long. So it's cheaper to ship several smaller pieces than it is one long piece. Cut pipe or hose are non-cancelable and non-returnable so please be sure you are ordering the correct size and length. The price you see is the price per foot on the custom length gray PVC pipes. Thank you.
Similar to 00113M but adapter not a bushing. One end goes into a 1" fitting and the other end provides a 32mm socket. Thus it will connect 25mm JIS pipe or 32mm DIM pipe to a 1" Fitting. (See the chart above. 32mm OD pipe called 32mm pipe if you use the DIN standard (Germany) or 25mm pipe if you use the JIS (Japan) standard.) In stock. On the US side this is 1" spigot meaning it'll glue into any sch 40/80 1" fitting. If you need to join it to 1" pipe you'll use a standard 1" couple along with this adapter.
40.72mm OD/32.02mm ID
NOTE: if you need 32mm pipe or hose to go into a 32MM JIS socket, our 1" Braided Hose (by the foot) (by the roll) works great. You can glue it in using standard PVC glue and we've tested it up to 75PSI. (Your mileage may vary.)