Metric adapters: There are two standards: JIS and DIN. Look carefully at the parts below. Some are identified by JIS and others DIN. We have the actual measurements of each part in the description of the part. So read carefully to find the right part. NOTE: The unions below show the actual metric opening NOT the nominal size. Just read the description and view the picture if you have any doubts! Call or email us if you still have any doubts! :-)
Here is a chart that might help you identify which metric pipe you have:
Similar to 00113M but adapter not a bushing. One end goes into a 1" fitting and the other end provides a 32mm socket. Thus it will connect 25mm JIS pipe or 32mm DIM pipe to a 1" Fitting. (See the chart above. 32mm OD pipe called 32mm pipe if you use the DIN standard (Germany) or 25mm pipe if you use the JIS (Japan) standard.) In stock. On the US side this is 1" spigot meaning it'll glue into any sch 40/80 1" fitting. If you need to join it to 1" pipe you'll use a standard 1" couple along with this adapter.
English Side
Metric Side
1.314"OD/1.007"ID
40.72mm OD/32.02mm ID
NOTE: if you need 32mm pipe or hose to go into a 32MM JIS socket, our 1" Braided Hose (by the foot) (by the roll) works great. You can glue it in using standard PVC glue and we've tested it up to 75PSI. (Your mileage may vary.)
