PRICES ON THE WEBSITE ARE SUBJECT TO CHANGE. ALL ORDERS ARE REVIEWED AND WE MAY HAVE TO ADJUST PRICES ON SOME ITEMS. You will given the option to accept the updated price or cancel. If your order is time sensitive, please use one of the expediated options on the check out page. Due to demand and lack of raw materials large orders for some items are out of stock for 1-3 months. Also please read UPS Suspends Performance Guarantee and shipping costs are rising very fast. Special order items may be delayed longer. Orders accepted 24/7/365 via the website. Toll Free Tech Support Hours: Mon-Fri, 10am to 4pm, PST. We also have an alternate phone number in case the above has problems: 1(877)782-3488. Thanks!
"If there be any among us who [disagree], let them stand undisturbed as monuments of the safety with which error of opinion may be tolerated, where reason is left free to combat it." Thomas Jefferson, March 4, 1801
VERY IMPORTANT: Metric pipe, adapters and fittings
There are two metric pipe standards: JIS and DIN. The very first thing you need to do is determine which standard you have. Use the chart below to determine which you have by measuring the ID and oD of your pipe and comparing it with the numbers in the chart below. It helps if you have a digital caliper set to read in mm. All our pipe is DIN, but the fittings are identified by JIS and others DIN. So just watch that. We have the actual measurements of each part in the description of the part. Call or email us if you have questions! :-)
Here is a chart that will help you identify which metric pipe you have:
Price includes DIN PVC pipe and cutting charges. Cuts for metric PVC pipes will be clean straight cuts. Please note: UPS adds a surcharge for all packages over 4' long. So it's cheaper to ship several smaller pieces than it is one long piece. Cut pipe or hose are non-cancelable and non-returnable so please be sure you are ordering the correct size and length. The price you see is the price per foot on the custom length gray PVC pipes. Thank you.
This is a fabricated fitting: 25mm DIN Slip Socket on one side and 1/4" Female British Standard Thread on the other. (Comes with an O-ring for your male BSPP part). You will need a short piece of 25mm pipe to join this to another fitting (like a tee, couple, wye, etc.). If you don't have any you can buy a short piece on our metric pipe page. (PN10 or PN16 both usually in stock.)
