If your order is time sensitive, please use one of the expediated options on the check out page but please read our shipping advisory page. Orders accepted 24/7/365 via the website. Toll Free Tech Support Hours: Mon-Fri, 10am to 4pm, PST. We also have an alternate phone number in case the above has problems: 1(877)782-3488. Thank you! :-) Use discount code "SAVE7" for 7% off your order!
"If there be any among us who [disagree], let them stand undisturbed as monuments of the safety with which error of opinion may be tolerated, where reason is left free to combat it." Thomas Jefferson, March 4, 1801
Note: These items are the most often items ordered incorrectly on our website. Please read carefully the information we have on this page and click on the "more info & Details" link under each item for more info and details. Call or email if you have questions or are unsure of what you are ordering. Thank you!
If you are putting pipe into the flange, you need the 1005-xxx number. If you are putting the flange into another fitting you need 1006-xxx numbers. THERE ARE NO FLANGES THAT GO INTO PIPE! See this picture for examples of square flange differences.
Please note, square flanges are generally not UV resistance, they may discolor over time when exposed to sunlight.
Also see our PVC Mounting Caps. Mounting caps are UV resistance and will not discolor when exposed to sunlight.
Explore our selection of PVC mounting flanges below. We offer round and square PVC flange styles to suit your project needs. MADE IN THE USA
This is a Square Mounting Flange with a 2" Sch 40 spigot (ie, pipe size). You would mount this flange to something and then a 2" Sch 40 pvc pipe fitting would glue over it. Perfect for something like a towel bar where you want it very close to the wall. IF YOU WANT TO GLUE PIPE INTO IT, YOU NEED PART NUMBER Slip Socket Square Flange, 1005-2W. These flanges are great for mounting anchoring pipe to structures, concrete (with tapcons), decks, patios, etc.
Note: The underside of the flange has a raised ring you will need to grind or sand off if you want it to lay perfectly flat.
Important Dimensions:
Base: 3.35" Square
Height Overall: 1.66"
Height Without Ring: 1.54"
OD: 2.375" (Spigot, same as 2" Pipe)
ID: 2" (Same as 2" Pipe)
Hole Size: Approx. 3/16"
CL to CL of bolt holes is 2.90" Square.
Flange Thickness: Approx .25"
Imported, Made in Mexico, formerly known as 1006-2W.