If your order is time sensitive, please use one of the expedited options on the check out page, but please read our shipping advisory. Orders accepted 24/7/365 via the website. Toll Free Tech Support Hours: Mon-Fri, 10am to 4pm, PST. We also have an alternate phone number in case the above has problems: 1(877)782-3488. Thank you! Use discount code "SAVE7" for 7% off your order!
*** After you click on search, you'll need to scroll down to see the results.
"If there be any among us who [disagree], let them stand undisturbed as monuments of the safety with which error of opinion may be tolerated, where reason is left free to combat it." Thomas Jefferson, March 4, 1801
Our selection of inside PVC couplings (aka splices) are designed to fit into PVC pipes to connect 2 together. These PVC inside connectors are useful for repairs when pipe is flush with a wall or slab or in cases where you may not want to add to the outside diameter of the pipe. Our selection of PVC pipe fittings range from 1 inch to 6 inches, so you're sure to find what you need for your projects.
MADE IN THE USA
Fits inside 6" Sch 40 pipe with an ID of about 5.85-5.95". Aka 6" pipe. (Check the ID of your 6" pipe, Sch 40 and other pvc plastic pipe can vary quite abit.) This is usually a little loose fitting, meant mainly for drainage and vent pipe. It MIGHT work for pressure, but it'll depend in the exact ID and consistency of your 6" pipe, and of course how good a glue joint you make. The ID of the couple is 5.5", the OD is between 5.85 and 6.15". (You need to measure the ID of your pipe in at least 3 places and email us the measurements so we can make it to fit your pipe.) It's about 6" long overall. (inside6)