If your order is time sensitive, please use one of the expediated options on the check out page but please read our shipping advisory page. Orders accepted 24/7/365 via the website. Toll Free Tech Support Hours: Mon-Fri, 10am to 4pm, PST. We also have an alternate phone number in case the above has problems: 1(877)782-3488. Thank you! :-)
"If there be any among us who [disagree], let them stand undisturbed as monuments of the safety with which error of opinion may be tolerated, where reason is left free to combat it." Thomas Jefferson, March 4, 1801
Our selection of inside PVC couplings (aka splices) are designed to fit into PVC pipes to connect 2 together. These PVC inside connectors are useful for repairs when pipe is flush with a wall or slab or in cases where you may not want to add to the outside diameter of the pipe. Our selection of PVC pipe fittings range from 1 inch to 6 inches, so you're sure to find what you need for your projects.
MADE IN THE USA
Fits inside a pipe with an ID of about 5.96 to 6.00". Aka 6" pipe. (Check the ID of your 6" pipe, Sch 40 and other pvc plastic pipe can vary quite abit. Please contact us if your pipe is outside this range and we can adjust to make it fit for a small extra fee. YOU MUST contact is immediately by phone and/or email and give us your order number and specs for your pipe. Measure at least 3 places for the ID of your pipe. Most pipe is slightly egg-shaped.) This part goes into a 6" pipe and converts it to a 4" Sch 40 slip socket. May fit a little loose on some pipe or a little tighter on others. We try our best, but you may have to do a little sanding on the pipe to get a perfect fit because the ID of PVC pipe is NOT a toleranced DIMENSION.