|
|  |
451 Large Winter Nitrile GloveON SALE Atlas - 451 - Winter Nitrile Gloves, Large Size. These are really fantastic winter work gloves. Very flexible and keeps your hands warm.
|
|
|
|
|
| |
451 Medium Winter Nitrile GloveON SALE Atlas - 451 - Winter Nitrile Gloves, Medium Size. These are really fantastic winter work gloves. Very flexible and keeps your hands warm.
|
|
|
|
|
|  |
5 inch SDR 26 Pipe about 1 foot long with bell endBell ends for 5" pipe. One side will be 5" ID (.25" wall thickness, 5.5" OD, 5" ID.) and the other side will be 5" Bell end (.25" wall, 6" OD, 5.5" ID) Length will vary from 9" to about 18". There will be at least 5 inches of straigh pipe and at least 5" of bell end. The overall length my vary.
|
|
|
|
|
|  |
5 inch SDR 26 Pipe less than 1 foot longThese are scraps left over. They will be 5" to 11" long, ie less tan 1'. Picture is approximate. If you need a particular length, just note it in the comments/note box on the check out page. We will get as close as we can, but not guaranteed. Most pieces are about 6" long, but as short at 4" and as long as 11". First come first served. No rainchecks/no back orders. Thank you.
|
|
|
|
|
|  |
Clear 4 inch pipe, 1 piece 11.5 UV thinwallone piece 4" thinwall clear. a little scratches, but too bad. 11.5" long.
|
|
|
|
|
| |
C0013 10 inch pipe bell end 22.5 inches longWhite Sch 40 10" pipe with 10.75" OD and 9.976" ID with a bell end on one end. (Bell end about 11" OD). Total length is 22.5" About 11" of that is the bell with about 11" of straight 10" pipe.
|
|
|
|
|
| |
C0036 6 inch sch 40 8.75 inches long.White Sch 40 6" pipe by 8.75" long. 6.5" OD, 6" ID. Only 1 at this price!
|
|
|
|
|
| |
Dirty Fittings OkayDuring the move, several boxes of fittings were broken open and scattered about. If you can accept fittings with scraps, scuff marks and even the occasional paint or primer splatter, add this item to your cart and we'll credit you back 30% for every dirty fitting we send you. Note, this is just for the parts we send that are dirty or "cosmetically challanged." For instance, if you order 10 fittings and they are $1 each, but we send 7 "dirty fittings" those seven would be rebated $.30 each and the remaining 3 would be billed at $1. You will initially be charged for all good fittings and then later after the order has been pulled if you accept dirty fittings the shipping department will note which fittings and how many of each were dirty and accounting will then rebate your card for the "dirty fittings."
|
|
|
|
