10-2107BLK BH 1 inch BLACK PVC

1" BLACK bulk head fitting. Front, flange side is slip socket. Back side is standard 1" slip socket, about 1" deep. Wall thickness up to 1-3/4". Hole saw size is 1-5/8 to 2". Front flange diameter is 2-1/2". Heavy duty fitting. This is the last PVC bulkhead fitting available. All others are not either ABS or a abs/pvc hybrid material. Limited to stock on hand.

10-2107WHT Bulkhead 1 inch White

1" bulk head fitting. Front, flange side is threaded approx. 1" FPT. It's a loose fit, but if you wrap some extra teflon tape on the male part and if the pressure isn't too much, you can get a good seal. Back side is stand 1" slip socket, about 1" deep. Wall thickness up to 1-3/4". Hole saw size is 1-5/8 to 2". Front flange diameter is 2-1/2". Heavy duty fitting.

10-2200BLK 1/2 black bulk head

1/2" disco'ed black bulk head ftting.

10-3320 BH 1.5 inch White HD ABS

1.5" bulk head fitting. Approx. 2" thread depth. 1.5" PVC pipe will glue into the backside. Front size is threaded, 1.5FPT. Nipple or MPT fitting will thread into the front side. Back socket is standard depth, slip socket. Wall thickness up to 2". Hole saw size is 2-1/2". Front flange diameter is 3-1/2". Backside threads 2.35" OD, (Gasket is 2.5" ID, 3.125" OD) Very heavy duty fitting. For short, extra long, and black 1.5" bulk head fittings, scroll below. This is a hybrid plastic. Part ABS and part PVC. It will work in any drainage situation or low pressure situation. (50' of head pressure, or about 30PSI)

Limited to stock on hand (about 5). Disco'd item.

10-6014W BH 2 inch slip White ABS

2" bulk head fitting. Approx. 2" thread depth. 2" PVC pipe will glue into the backside, we well as the front side, however, front is a very shallow socket. Back socket is standard depth. Wall thickness up to 2". Hole size is 2-7/8" to 3-1/2". Front flange diameter is 3-7/8". Very heavy duty fitting. If you are going to use the screen available below you must use this 2" bulk head fitting. This is a hybrid plastic. Part ABS and part PVC. It will work in any drainage situation or low pressure situation. (50' of head pressure, or about 30PSI)

10-6016BLK BH 2 inch BLACK

2" BLACK bulk head fitting. Approx. 2" thread depth. 2" PVC pipe will glue into the backside. Front flange side has threads on the inside, approx. equal to 2" FPT. Back socket is standard depth. Wall thickness up to 2". Hole size is 2-7/8" to 3-1/2". Front flange diameter is 3-7/8". Very heavy duty fitting. Will not work with screen without modifying the screen.

10-6016NAT BH 2 inch Natural HD ABS

2" NATURAL bulk head fitting. Approx. 2" thread depth. 2" PVC pipe will glue into the backside. Front flange side has threads on the inside, approx. equal to 2" FPT. Back socket is standard depth. Wall thickness up to 2". Hole size is 2-7/8" to 3-1/2". Front flange diameter is 3-7/8". Very heavy duty fitting. Will not work with screen without modifying the screen.

11-1100BLK BH 3/4 inch BLACK

3/4" BLACK bulk head fitting. Front is threaded, and will fit, 3/4 pipe thread, but it's a loose fit. If you wrap some extra teflon tape on the male part and if the pressure isn't too much, you can get a good seal. Back side is standard 3/4" slip socket. Wall thickness up to 1-3/4". Hole saw size is 1-5/8 to 2". Front flange diameter is 2-1/2". Heavy duty fitting. Works great our 3/4" MPT Drum Faucet if you use extra teflon tape on the threads of the valve.

11-1120BLK 1/2 inch BLACK BH

1/2" BLACK bulk head fitting. Back side is standard 1/2" slip socket. Wall thickness is 0' to 1-1/8." Hole saw size is 1-1/8 to 1-1/4". Front flange diameter is 1-11/16", flange thickness is .16" Overall length is 1.716". Medium duty fitting.

400-9150 Bulkhead 1.5 short ABS FPT x Slip

White 1.5" bulk head fitting short. Approx. 1" thread depth. Front size is slip socket, however, the front is a very shallow socket, so you'll only get about 5/8" engagement. Back socket is also short, only about 3/8" socket depth.) Hole saw size is 2-1/2". Front flange diameter is 3-1/2". (Gasket is 2.5" ID, 3.125" OD) Heavy duty fitting. This is a hybrid plastic. Part ABS and part PVC. It will work in any drainage situation or low pressure situation. (50' of head pressure, or about 30PSI)Discontinued part, limited to stock on hand. (replacement for 10-3810WHT which is now discontinued.)