 |
 |
Pipe Extenders Inside Pipe Extenders to glue into a piece of pipe broken off. Available for Sch 40 and Class 200 pipe. Also Pipe Bell End Extenders to add just a short length of pipe to an existing pipe. |
 |
 |
Inside Pipe Couples Glues inside Sch 40 PVC pipe to couple 2 piece of pipe together, on the inside. |
|
 |
 |
Sch 40 Fitting extenders These fittings go over most Sch 40 pvc fittings to extend the fitting so you can glue a new piece of pipe to something that may have a piece of pipe broken off inside it. |
 |
 |
Snap Tees These Tees snap over Sch 40 pvc pipe and allow you to "tap" into an existing pipe and locate a branch. |
|
 |
 |
Inside Pipe Plugs These plugs not only glue into the pipe, but the center section actually unthreads to provide you with a FPT tap one size smaller than the pipe. Ie, if you glue one of these fittings into a 2" pipe, you provide yourself with a 1.5" FPT port or tap by just unthreading the plug that comes with it. |
 |
 |
Telescoping Couple This couple allows you to cut into an existing pipe that has damage, such as a crack, cut out the bad part and the put this item in it's place. The one side glues either directly into a fitting or on to a pipe and the other side slides out to connect to the other part of the orginal pipe. Potable water rated and NSF rated! |
|