|
|  |
0301-224W-12 1.5inch Washer O-ringThis is a very specialized part. Union Washer and O-ring combination piece for 1.5" unions, pump unions and heater unions.
|
|
|
|
|
| |
0301-229W 2inch Washer O-ringThis is a very specialized part. Union Washer and O-ring combination piece for 2" unions, pump unions and heater unions.
|
|
|
|
|
|  |
0703-20 Buttress Thread 2inch Plug2" Buttress Thread Flat Plug. Great for when you want to cap off a pump or union that has 2" buttress thread.
|
|
|
|
|
|  |
417-4010 1.5 buttress x 1.5 slipUnion Tailpiece. 1.5" buttress thread by 1.5" slip socket (O-ring groove on union, not this tailpiece. Has a flat surface for the 0-ring of a union to seal against.) (same as 415-4010)
|
|
|
|
|
|  |
417-4020 1.5 buttress x 1.5 SHORTGreat adaptor fitting. 1.5" Buttress thread (Male) by 1.5" SHORT slip socket. Overall length of this fitting is 1.137" but still allows a .98" deep socket for the 1.5" pipe to glue into. Useful for really tight spaces. Measurment across the threads is 2.415". Flat surface for o-ring to seal against.
|
|
|
|
|
|  |
417-4030 1.5 buttress x 1.5 spigotGreat adaptor fitting. 1.5" Buttress thread (Male) by 1.5" spigot. Measurment across the threads is 2.415". Flat surface for o-ring to seal against.
|
|
|
|
|
|  |
417-4060 1.5 buttress x 1.5 mpt 1.5" Buttress thread (Male) by 1.5" male pipe thread. Measurment across the threads is 2.415". Flat surface for o-ring to seal against.
|
|
|
|
|
|  |
417-4161 1.5 buttress x 1.5 mpt Special order fitting. Used 417-4160 if you need it quick. Only difference is this one is black (the other is white) and it's 1.5" SHORT male pipe thread by 1.5" buttress thread. Saves about 3/4" in overall length.
|
|
|
|
|
|  |
417-5010 2 buttress x 2 spigotUnion Tailpiece. 2" buttress thread by 2" spigot (glues into 2" socket). Also 2" buttress thead by 1.5" Slip Socket. (O-ring groove on union, not this tailpiece. Has a flat surface for the 0-ring of a union to seal against.)
|
|
|
|
|
|  |
417-5040 2 Buttress x 2 Slip SocketGreat adaptor fitting. 2" Buttress thread (Male) by 2" slip socket. No o-ring on this part, so you'll have to seal by the threads or have it mate to a part that has the o-ring on it. Union Tailpiece. 2" buttress thread by 2" Slip Socket. Has a flat surface for the 0-ring of a union to seal against. Measurement of the diameter of the threads shows 3.08"
|
|
|
|
|
|  |
417-5080 1.5 buttress x 2 spigotGreat adaptor fitting. 1.5" Buttress thread (Male) by 2" spgiot (glues into a 2" fitting). Measurment across the threads is 2.415". Flat surface for o-ring to seal against.
|
|
|
|
|
|  |
0060150019 Buttress Reducer/ExpanderGreat little reducer/expander bushing. 1.5" Buttress thread by 2" male buttress thread. The primary use for this is to thread on to a pump with 1.5" male buttress theads and allow a connection with 2" pipe thereby increaseing the flow available to the pump, thereby increasing the flow of the output of the pump. It can also be used to neck down a 2" buttress thread to 1.5" buttress thread. Comes with o-ring for the 1.5" Female buttress side.
|
|
|
|
