|
|  |
EXT005 1/2 inch pipe Bell End Extenders Sch40One side glues into a 1/2" fitting and the other side provides a 1/2" slip socket that glues over the existing pipe. Used for those situations where you just need to extend the pipe a little bit further. Overall length about 2"-2.5" long. You can cut it a little shorter if needed.
|
|
|
|
|
| |
EXT007 3/4 inch pipe Bell End Extenders Sch40One side glues into a 3/4" fitting and the other side provides a 3/4"slip socket that glues over the existing pipe. Used for those situations where you just need to extend the pipe a little bit further. Overall length about 2"-3" long. You can cut it a little shorter if needed.
|
|
|
|
|
| |
EXT010 1 inch pipe Bell End Extenders Sch40One side glues into a 1" fitting and the other side provides a 1" slip socket that glues over the existing pipe. Used for those situations where you just need to extend the pipe a little bit further. Overall length about 3-4" long. You can cut it a little shorter if needed.
|
|
|
|
|
| |
EXT012 1.25 inch pipe Bell End Extenders Sch40One side glues into a 1.25" fitting and the other side provides a 1.25" slip socket that glues over the existing pipe. Used for those situations where you just need to extend the pipe a little bit further. Overall length about 3-4" long. You can cut it a little shorter if needed.
|
|
|
|
|
| |
EXT015 1.5 inch pipe Bell End Extenders Sch40One side glues into a 1.5" fitting and the other side provides a 1.5" slip socket that glues over the existing pipe. Used for those situations where you just need to extend the pipe a little bit further. Overall length about 3-4" long. You can cut it a little shorter if needed.
|
|
|
|
|
| |
EXT020 2 inch pipe Bell End Extenders Sch40One side glues into a 2" fitting and the other side provides a 2" slip socket that glues over the existing pipe. Used for those situations where you just need to extend the pipe a little bit further. Overall length about 4-5" long. You can cut it a little shorter if needed. Always low stock. Not always available. Order and we'll let you know if it's out of stock. Thank you.
|
|
|
|
|
| |
EXT025 2.5 inch pipe Bell End Extenders Sch40One side glues into a 2-1/2" fitting and the other side provides a 2-1/2" slip socket that glues over the existing pipe. Used for those situations where you just need to extend the pipe a little bit further. Overall length about 5" long. You can cut it a little shorter if needed.
|
|
|
|
|
| |
EXT030 3 inch pipe Bell End Extenders Sch40One side glues into a 3" fitting and the other side provides a 3" slip socket that glues over the existing pipe. Used for those situations where you just need to extend the pipe a little bit further. Overall length about 5" long. You can cut it a little shorter if needed.
|
|
|
|
|
| |
EXT040 4 inch pipe Bell End Extenders Sch40One side glues into a 4" fitting and the other side provides a 4" slip socket that glues over the existing pipe. Used for those situations where you just need to extend the pipe a little bit further. Overall length about 7" long. You can cut it a little shorter if needed.
|
|
|
|
|
| |
EXT050 5 inch pipe Bell End Extenders Fits Sch40One side glues into a 5" fitting and the other side provides a 5" slip socket that glues over the existing pipe. Used for those situations where you just need to extend the pipe a little bit further. Overall length about 10" long. You can cut it a little shorter if needed.
|
|
|
|
|
| |
EXT060 6 inch pipe Bell End Extenders Sch40One side glues into a 6" fitting and the other side provides a 6" slip socket that glues over the existing pipe. Used for those situations where you just need to extend the pipe a little bit further. Overall length about 12" long. You can cut it a little shorter if needed.
|
|
|
|
|
| |
EXT080 8 inch pipe Bell End Extenders Sch40One side glues into a 8" fitting and the other side provides a 8" slip socket that glues over the existing pipe. Used for those situations where you just need to extend the pipe a little bit further. Overall length about 12-16" long. You can cut it a little shorter if needed.
|
|
|
|
|
| |
EXT100 10 inch pipe Bell End Extenders Sch40One side glues into a 10" fitting and the other side provides a 10" slip socket that glues over the existing pipe. Used for those situations where you just need to extend the pipe a little bit further. Overall length about 2' long. You can cut it a little shorter if needed.
|
|
|
|
|
| |
EXT120 12 inch pipe Bell End Extenders Sch40One side glues into a 12" fitting and the other side provides a 12" slip socket that glues over the existing pipe. Used for those situations where you just need to extend the pipe a little bit further. Overall length about 2.5' long. You can cut it a little shorter if needed.
|
|
|
|
|
|  |
PEXT012 1.25 inch pipe Bell End Extenders Purple SDR21 PipeOne side glues into a 1.25" fitting and the other side provides a 1.25" slip socket that glues over the existing pipe. Used for those situations where you just need to extend the pipe a little bit further. Overall length about 3-4" long. You can cut it a little shorter if needed.
|
|
|
|
|
|  |
ThinEXT010 1.00 inch pipe Bell End Extenders Class 200One side glues into a 1" fitting and the other side provides a 1" slip socket that glues over the existing pipe. Used for those situations where you just need to extend the pipe a little bit further. Overall length about 3-4" long. You can cut it a little shorter if needed. Thinwall Class 200 pipe size.
|
|
|
|
|
| |
ThinEXT012 1.25 inch pipe Bell End Extenders Class 200One side glues into a 1.25" fitting and the other side provides a 1.25" slip socket that glues over the existing pipe. Used for those situations where you just need to extend the pipe a little bit further. Overall length about 3-4" long. You can cut it a little shorter if needed. Thinwall Class 200 pipe size.
|
|
|
|
|
| |
ThinEXT015 1.5 inch pipe Bell End Extenders Class 200One side glues into a 1.5" fitting and the other side provides a 1.5" slip socket that glues over the existing pipe. Used for those situations where you just need to extend the pipe a little bit further. Overall length about 3-4" long. You can cut it a little shorter if needed. Thinwall Class 200 pipe size.
|
|
|
|
|
ThinEXT020 2inch pipe Bell End Extenders Class 200One side glues into a 2" fitting and the other side provides a 2" slip socket that glues over the existing pipe. Used for those situations where you just need to extend the pipe a little bit further. Overall length about 3-4" long. You can cut it a little shorter if needed. Thinwall Class 200 pipe size.
|
|
|
|
|
