If your order is time sensitive, please use one of the expedited options on the check out page, but please read our shipping advisory. Orders accepted 24/7/365 via the website. Toll Free Tech Support Hours: Mon-Fri, 10am to 4pm, PST. We also have an alternate phone number in case the above has problems: 1(877)782-3488. Thank you! Use discount code "SAVE7" for 7% off your order!
*** After you click on search, you'll need to scroll down to see the results.
"If there be any among us who [disagree], let them stand undisturbed as monuments of the safety with which error of opinion may be tolerated, where reason is left free to combat it." Thomas Jefferson, March 4, 1801
Flexible Rubber Fernco, for Cast Iron, Plastic, Copper, Steel or Lead to Cast Iron, Plastic, Copper, Steel or Lead. For details see Fernco Website for 1056-3/250 for details. Made in the U.S.A.
The page you are on is for buying clear tubing by the foot. However, if you are buying a lot, or you don't see the size you are looking for, click here for clear tubing by the roll.
1-1/4" True Wye fitting. 1-1/4" slip socket all three ports. Required when splitting flow and needing equal distribution, or in systems where any port could be the feed port. Made in the U.S.A.
Nested Venturi Tee, 1.5" Slip socket (also 2" spigot) input x 1-1/2" Slip socket output x 3/4 slip socket (also 1" spigot) venturi with 3/8" venturi orifice. Orifices are changeable if you have access to the exit side of the venturi. Other size orifices available. This Venturi Tee is the larger one shown in the picture. Tee has flow arrow imprinted on Tee to indicate flow direction. Spigot, aka street, means "same size as pipe" ie, it'll glue into a fitting. Made in the U.S.A.
This is a replacement nozzle for the 473-xxx series of venturi Tees. They will only fit the 473-xxx series and not the others we have on site. Made in the U.S.A.
Venturi T, 3/4" Slip socket/1" spigot in, 3/4 slip socket/1" spigot on the venturi feed (with 3/8" venturi orifice) and 1" slip socket on the exit. Orifices are changeable if you have access to the exit side of the venturi. Other size orifices available. (This is Venturi Tee is the smaller one shown in the picture. Tee has flow arrow imprinted on Tee to indicate flow direction.) Made in the U.S.A.
Manifold Wye with a 2" slip socket on one port and 2 1.5" ports. Overall length is 5.375", overall width is 5.525" and centerline to centerline of the 2 ports is 2.84". (No Cancellation or Refund)
This is a Manifold Wye with 1.25" slip sockets an all three ports. Overall length is 6", overall width is 4.51" and centerline to centerline of the 2 ports is 2.28". (No Cancellation or Refund)
This is one super Wye. Manifold Wye with 2.5" slip sockets on the intake and 2 1.25" ports on the out. Overall length is 6.85", overall width is 6.5" and centerline to centerline of the 2 ports is 3.39". (No Cancellation or Refund)