If your order is time sensitive, please use one of the expedited options on the check out page, but please read our shipping advisory. Orders accepted 24/7/365 via the website. Toll Free Tech Support Hours: Mon-Fri, 10am to 4pm, PST. We also have an alternate phone number in case the above has problems: 1(877)782-3488. Thank you! Use discount code "SAVE7" for 7% off your order!
*** After you click on search, you'll need to scroll down to see the results.
"If there be any among us who [disagree], let them stand undisturbed as monuments of the safety with which error of opinion may be tolerated, where reason is left free to combat it." Thomas Jefferson, March 4, 1801
The page you are on is for buying clear tubing by the roll. However, if you don't need a full roll, you can click here for clear tubing by the foot. (Note: not all sizes are available by the foot, and if you are buying a lot of it, it's cheaper to buy by the roll.)
Misting Nozzle Tee. 1/2" slip socket by 1/2" Slip Socket by 1/8" Female Pipe Thread. (in the middle) Perfect for misting systems. Fits 1/2" Sch 40, Sch 80, class 200, or 315 pipe, and adapts to 1/8th MPT misting nozzles. NOTE: This fitting has 1 support rib on the branch.
Made in the U.S.A., Alternate Part No. C2-402-071-1, 402-071-0,
This is a replacement nozzle for the 473-xxx series of venturi Tees. They will only fit the 473-xxx series and not the others we have on site. Made in the U.S.A.
Nested Venturi Tee, 1.5" Slip socket (also 2" spigot) input x 1-1/2" Slip socket output x 3/4 slip socket (also 1" spigot) venturi with 1/4" venturi orifice. Orifices are changeable if you have access to the exit side of the venturi. Other size orifices available. This Venturi Tee is the larger one shown in the picture. Tee has flow arrow imprinted on Tee to indicate flow direction. Spigot, aka street, means "same size as pipe" ie, it'll glue into a fitting. Made in the U.S.A.
Venturi T, 3/4" Slip socket/1" spigot in, 3/4 slip socket/1" spigot on the venturi feed (with 1/4" venturi orifice) and 1" slip socket on the exit. Orifices are changeable if you have access to the exit side of the venturi. Other size orifices available. (This is Venturi Tee is the smaller one shown in the picture. Tee has flow arrow imprinted on Tee to indicate flow direction.) Made in the U.S.A.
Manifold Wye with 2" slip socket on one port and 2 1" ports on the other 2. Overall length is 5.375", overall width is 5.525" and centerline to centerline of the 2 ports is 2.84". (No Cancellation or Refund)
This is one super Wye. Manifold Wye with 2.5" slip socket on the intake and 2 2" ports on the out. Overall length is 6.85", overall width is 6.5" and centerline to centerline of the 2 ports is 3.39". (No Cancellation or Refund)
UltraThinwall PVC Duct Pipe. 6.375" ID (nominal), 6.625" OD (fits standard sch 40/80 and DWV fittings). Wall thickness: .128". Weight per foot if 1.32#/ft. Air ducting pipe, has printing on it and normal handling scuffs. Gray color. Not pressure rated for liquids. Special order, no cancellations, no returns.
Flexible Rubber Fernco Cap for Cast Iron, Plastic, Copper, Steel or Lead to Cast Iron, Plastic, Copper, Steel or Lead. Fits range of pipe OD: 1.05" to 1.15" Stainless band clamp on each end. Aka, Furnco
Single 3" heavy duty hard polyurethane wheels, with 3/8" threaded shaft casters. Two of the casters have a lock brake. The shaft on these is just long enough to go through our 3/8" caster inserts and get a nut on it. These do not come with a nut (any 3/8 coarse thread will do) and we recommend you use loctite on the nut to make sure it stays put. Very good quality casters, we use them here all the time.
Aquaseal 3/4 oz Flexible Repair Adhesive for PVC, Vinyl, EPDM, Neoprene, Urethane, Gore-tex, leather, suede, rubber, etc. Great for repairs in wet suits, tents, boots, nylon screen, tarps, inflatables, Zodiacs, waders, etc. Sticks hard, but flexes with the material being repaired.