|
|  |
10-2107BLK BH 1 inch BLACK PVC1" BLACK bulk head fitting. Front, flange side is threaded approx. 1" FPT. It's a loose fit, but if you wrap some extra teflon tape on the male part and if the pressure isn't too much, you can get a good seal. Back side is stand 1" slip socket, about 1" deep. Wall thickness up to 1-3/4". Hole saw size is 1-5/8 to 2". Front flange diameter is 2-1/2". Heavy duty fitting.
|
|
|
|
|
|  |
10-2107WHT Bulkhead 1 inch White1" bulk head fitting. Front, flange side is threaded approx. 1" FPT. It's a loose fit, but if you wrap some extra teflon tape on the male part and if the pressure isn't too much, you can get a good seal. Back side is stand 1" slip socket, about 1" deep. Wall thickness up to 1-3/4". Hole saw size is 1-5/8 to 2". Front flange diameter is 2-1/2". Heavy duty fitting.
|
|
|
|
|
|  |
10-3320 BH 1.5 inch White HD ABS1.5" bulk head fitting. Approx. 2" thread depth. 1.5" PVC pipe will glue into the backside. Front size is threaded, 1.5FPT. Nipple or MPT fitting will thread into the front side. Back socket is standard depth, slip socket. Wall thickness up to 2". Hole saw size is 2-1/2". Front flange diameter is 3-1/2". Backside threads 2.35" OD, (Gasket is 2.5" ID, 3.125" OD) Very heavy duty fitting. For short, extra long, and black 1.5" bulk head fittings, scroll below. This is a hybrid plastic. Part ABS and part PVC. It will work in any drainage situation or low pressure situation. (50' of head pressure, or about 30PSI)
|
|
|
|
|
|  |
10-3320BLK HD BH 1.5 fitting BLACKRARE, hard to find, 1.5" BLACK bulk head fitting. Approx. 2" thread depth. 1.5" PVC pipe will glue into the backside. Front size is threaded, approx. 1.5FPT (nipple or MPT fitting will thread into the front side, however, the front is a very shallow socket, so you'll only get 5-6 threads engagement. Back socket is standard depth, slip socket.) Wall thickness up to 2". Hole saw size is 2-1/2". Front flange diameter is 3-1/2". (Gasket is 2.5" ID, 3.125" OD) Very heavy duty fitting. Black screen also available, see this page. Now comes with Black Nut, not white.
|
|
|
|
|
|  |
10-3810WHT Bulkhead 1.5 short ABS1.5" bulk head fitting short. Approx. 1" thread depth. Front size is slip socket, however, the front is a very shallow socket, so you'll only get about 5/8" engagement. Back socket is also short, only about 3/8" socket depth.) Hole saw size is 2-1/2". Front flange diameter is 3-1/2". (Gasket is 2.5" ID, 3.125" OD) Heavy duty fitting. This is a hybrid plastic. Part ABS and part PVC. It will work in any drainage situation or low pressure situation. (50' of head pressure, or about 30PSI)
|
|
|
|
|
|  |
10-3818BLK.Bulkhead 1.5 inch BLACKSPECIAL BUY, LIMITED STOCK FITTING - PVC BLACK, 1.5" bulk head fitting. Wall thickness up to 3/4". Hole saw size is 2-1/2". Front flange diameter is 3-1/2". (Gasket is 2.5" ID, 3.125" OD) Very heavy duty fitting. THERE ARE NO INTERNAL THREADS ON THIS FITTING. Slip socket on the front and back, but very shallow (about 1/2" deep.) Since no internal threads, this bulk head cannot be used with any of the screens.
|
|
|
|
|
|  |
10-6014W BH 2 inch slip White ABS2" bulk head fitting. Approx. 2" thread depth. 2" PVC pipe will glue into the backside, we well as the front side, however, front is a very shallow socket. Back socket is standard depth. Wall thickness up to 2". Hole size is 2-7/8" to 3-1/2". Front flange diameter is 3-7/8". Very heavy duty fitting. If you are going to use the screen available below you must use this 2" bulk head fitting. This is a hybrid plastic. Part ABS and part PVC. It will work in any drainage situation or low pressure situation. (50' of head pressure, or about 30PSI)
|
|
|
|
|
|  |
10-6016BLK BH 2 inch BLACK2" BLACK bulk head fitting. Approx. 2" thread depth. 2" PVC pipe will glue into the backside. Front flange side has threads on the inside, approx. equal to 2" FPT. Back socket is standard depth. Wall thickness up to 2". Hole size is 2-7/8" to 3-1/2". Front flange diameter is 3-7/8". Very heavy duty fitting. Will not work with screen without modifying the screen.
|
|
|
|
|
|  |
10-6016W BH 2 inch threaded White2" bulk head fitting, flange side has 2" FPT, back side is 2" slip socket. Approx. 2" thread depth. 2" PVC pipe will glue into the backside, Wall thickness up to 2". Hole size is 2-7/8" to 3-1/2". Front flange diameter is 3-7/8". Very heavy duty fitting. Will not work with screen without modifying the screen, however it will work with the Vertical Screens for bulk head fittings.
|
|
|
|
|
|  |
10-6200 BH 2 inch with T Back WhiteRARE, hard to find, 2" bulk head fitting with T back. One side takes 2" pvc pipe, the other side is 1.5" pvc pipe. Approx. 2" thread depth. Wall thickness up to 1". Hole size is 2-7/8" to 3-1/2". Front flange diameter is 3-7/8". Very heavy duty fitting.
|
|
|
|
|
|  |
11-1100BLK BH 3/4 inch BLACK3/4" BLACK bulk head fitting. Front is threaded, and will fit, 3/4 pipe thread, but it's a loose fit. If you wrap some extra teflon tape on the male part and if the pressure isn't too much, you can get a good seal. Back side is standard 3/4" slip socket. Wall thickness up to 1-3/4". Hole saw size is 1-5/8 to 2". Front flange diameter is 2-1/2". Heavy duty fitting. Works great our 3/4" MPT Drum Faucet if you use extra teflon tape on the threads of the valve.
|
|
|
|
|
|  |
11-1100WHT BH 3/4 inch White3/4" bulk head fitting. Front is threaded, and will fit, 3/4 pipe thread, but it's a loose fit. If you wrap some extra teflon tape on the male part and if the pressure isn't too much, you can get a good seal. Back side is standard 3/4" slip socket. Wall thickness up to 1-3/4". Hole saw size is 1-5/8 to 2". Front flange diameter is 2-1/2". Heavy duty fitting. Works great our 3/4" MPT Drum Faucet if you use extra teflon tape on the threads of the valve.
|
|
|
|
|
|  |
11-1120BLK 1/2 inch BLACK BH1/2" BLACK bulk head fitting. Back side is standard 1/2" slip socket. Wall thickness is 0' to 1-1/8." Hole saw size is 1-1/8 to 1-1/4". Front flange diameter is 1-11/16", flange thickness is .16" Overall length is 1.716". Medium duty fitting.
|
|
|
|
|
|  |
11-1120WHT 1/2 inch BH White1/2" bulk head fitting. Front is threaded, but unknown threads and shallow. Back side is standard 1/2" slip socket. Wall thickness is 0' to 1-1/8." Hole saw size is 1-1/8 to 1-1/4". Front flange diameter is 1-11/16", flange thickness is .16" Overall length is 1.716". Medium duty fitting.
|
|
|
|
|
|  |
643-4630 3 inch bulkhead fitting3" Bulkhead Fitting. Requires a 4-1/8" hole. For wall thicknessed up to 1" thick. Front side has smooth radius intake for less turbulence. Back side has standard 3" slip socket for gluing in pvc pipe. Fitting is ABS, but it will glue to PVC with pvc cement for low pressure and suction applications. Comes with nut for the backside, and gasket. A hideously ugly screen is also available as a special order for extra cost if you really want it. Email us for details.
Click here for another view
NOT LEGAL for use on a spa or hot tub or swimming pool.
|
|
|
|
|
|  |
EXTRALONG 1.5-2 inch bulkheadThis is an extra long 1.5"/2" bulk head fitting for wall thickness between 2" and 5.375". The one end has a standard 1.5" flange and the other end threads onto it. Hole size is 2-7/8" exactly. No gasket for this fitting, you'll have to silicone it. This is a strange fitting to describe, best to just get one and see if it'll work for your application.
|
|
|
|
|
|  |
10-6764 Black Bulkhead with ScreenON SALE! 2" Bulk head fitting with screen and screw. Black screen (rest of the fitting white) Requires 3-1/4" hole, flange diameter 3-7/8". Good for wall thickness upto 1/2". Screen Flow Rating: 124GPM/7440GPH. Does NOT come with a gasket, you'll have to silicone this one. Overall OD: 4". Size of holes in screen: 7/64" (largest of all the screens)
|
|
|
|
|
|  |
10-6764 White Bulkhead with ScreenON SALE! 2" Bulk head fitting with screen and screw. White screen (rest of the fitting white) Requires 3-1/4" hole, flange diameter 3-7/8". Good for wall thickness upto 1/2". Screen Flow Rating: 124GPM/7440GPH. Does NOT come with a gasket, you'll have to silicone this one. Overall OD: 4". Size of holes in screen: 7/64" (largest of all the screens)
|
|
|
|
|
|  |
10-6765ANY Bulkhead with Screen Massive 2.5" Bulk head fitting with screen and screw. We have many different colors, we pick what we send. Requires 4" hole, flange diameter 4-7/8". On the back you a 2" PVC pipe socket or a 2.5" spigot. Good for wall thickness up to 7/8". Screen Flow Rating: 208GPM/12,480GPH. Does NOT come with a gasket, you'll have to silicone this one. Overall OD of screen: 5". Size of holes in screen: 3/32"
|
|
|
|
|
|  |
10-6765 White Bulkhead with ScreenMassive 2.5" Bulk head fitting with WHITE screen and screw. Requires 4" hole, flange diameter 4-7/8". On the back you a 2" PVC pipe socket or a 2.5" spigot. Good for wall thickness up to 7/8". Screen Flow Rating: 208GPM/12,480GPH. Does NOT come with a gasket, you'll have to silicone this one. Overall OD: 5". Size of holes in screen: 3/32".
|
|
|
|
