|
|  |
90degree nut for 1.5 bulk head This 90 degree nut will work on the 1.5" heavy duty and 1.5" light duty bulk head fittings. Instead of coming straight out from the fitting, this nut forms a 90 degree bend.
|
|
|
|
|
|  |
Extra Nuts for 1.5 HD bulkhead Extra nut for the 1.5" HD bulkhead fitting
|
|
|
|
|
|  |
90degree nut for 1/2 bulk headsVery low stock; discontinued part; Orders limited to stock on hand This 90 degree nut will work on the 1/2" bulk head fittings. Instead of coming straight out from the fitting, this nut forms a 90 degree bend. Takes 1" in the slip socket end. Dimensions are: Overall length 2.72", Overall Width 1.85" Clear fitting. In stock, but currently at low levels. Works with 10-2200BLK BH 1/2 inch BLACK W/CAP
11-1120BLK 1/2 inch BLACK BH
|
|
|
|
|
|  |
Plug with O-Ring for 1.5 Bulkhead Great little part. This is an O-Ringed plug that goes into the flange side of the 1.5" HD bulk heads. O-Ring makes the seal, so you get a good seal with less turning than a standard MPT plug. (Which will also work.)
|
|
|
|
|
|  |
50-2208BLK Cap for 1/2 bulk headthreads into the top side of the 1/2 bulk head fitting 11-1120BLK. Special order allow extra time. Not always in stock.
|
|
|
|
|
|  |
90degree nut for 1 & 3/4 bulk headsVery low stock; discontinued part; Orders limited to stock on hand This 90 degree nut will work on the 1" and 3/4" bulk head fittings. Instead of coming straight out from the fitting, this nut forms a 90 degree bend. Takes 1" in the slip socket end. Dimensions are: Overall length 2.88", Overall Width 1.66" In stock, but currently at low levels. Fits the following bulkhead fittings: 11-1100BLK BH 3/4 inch BLACK
11-1100WHT BH 3/4 inch White
10-2107WHT Bulkhead 1 inch White
10-2107BLK BH 1 inch BLACK PVC
|
|
|
|
|
| |
Extra Gasket ABS Econ.1/2 BulkheadsFor those who have asked for extra gaskets for the 1/2" economy black abs bulkhead fittings. Works with all 1/2" economy black abs bulkhead fittings.
|
|
|
|
|
| |
Extra Gasket ABS Econ.1/2 BulkheadsFor those who have asked for extra gaskets for the 3/4" economy black abs bulkhead fittings. Works with all 3/4" economy black abs bulkhead fittings.
|
|
|
|
|
| |
Extra Gasket ABS Econ.1 BulkheadsFor those who have asked for extra gaskets for the 1" economy black abs bulkhead fittings. Works with all 1" economy black abs bulkhead fittings.
|
|
|
|
|
| |
Extra Gasket ABS Econ.1.5 BulkheadsFor those who have asked for extra gaskets for the 1.5" economy black abs bulkhead fittings. Works with all 1.5" economy black abs bulkhead fittings.
|
|
|
|
|
| |
Extra Gasket ABS Econ.2 BulkheadsFor those who have asked for extra gaskets for the 2" economy black abs bulkhead fittings. Works with all 2" economy black abs bulkhead fittings.
|
|
|
|
|
| |
Extra Gasket Standard 1/2 BulkheadsFor those who have asked for extra gaskets for the 1/2" standard bulkhead fittings. Works with all 1/2" standard bulkhead fittings. (not economy)
|
|
|
|
|
| |
Extra Gasket Standard 3/4 BulkheadsFor those who have asked for extra gaskets for the 3/4" standard bulkhead fittings. Works with all 3/4" standard bulkhead fittings. (not economy)
|
|
|
|
|
| |
Extra Gasket Standard 1 BulkheadsFor those who have asked for extra gaskets for the 1" standard bulkhead fittings. Works with all 1" standard bulkhead fittings. (not economy)
|
|
|
|
|
| |
Extra Gasket Standard 1.5 BulkheadsFor those who have asked for extra gaskets for the 1.5" standard bulkhead fittings. Works with all 1.5" standard bulkhead fittings. (not economy)
|
|
|
|
|
| |
Extra Gasket Standard 2 BulkheadsFor those who have asked for extra gaskets for the 2" standard bulkhead fittings. Works with all 2" standard bulkhead fittings. (not economy)
|
|
|
|
|
Bulkhead Fitting ToolThis is a plastic tool to hold the flange side of the bulk head while you tighten up the backside nut. It will work on the 1.5" HD (10-3320, 10-3320BLK, 10-3818BLK, and 10-3810WHT only.) and 3/4"& 1" bulkhead fittings (10-2107BLK, 10-2107WHT, 11-1100BLK and 11-1100WHT only.)
|
|
|
|
|
